sys•tem:
a group of interacting, interrelated, or interdependent
elements forming a complex whole.
In considering the above dictionary definition,
one can see how what we are offering for the extermination of
the mosquito and insect population of your residence or business
is indeed a true system. The major purpose and function of the
MOSQUITO-PROTM
automated insect misting system is the delivery of Pyrethrum within
a proscribed area. The composition of the system itself can most
simply be compared to the human anatomy in that it is similarly
comprised of major elements functioning together towards an overall
purpose:
Circuit Board serving as the brain
Pump and Motor Assembly being the heart
Nozzle Network or intravenous
system
Pyrethrum being the blood
Circuit Board
The Circuit Board performs the same function
for the MOSQUITO-PROTM
system as the brain does for the human
body. It is a true computer that is programmed or given instructions
by the operator through the control panel with its LCD display
and
easy to use buttons. By pre-setting instructions into the circuit
board, the system can be activated and controlled, told just when
to spray and for how long. In this manner the mist cycles are
regulated in such a way as to assure thorough spray coverage throughout
the perimeter misting area. By means of a level sensor that is
placed into the reservoir you will always know exactly how much
Pyrethrum is remaining. The LCD display will show, in increments
of 25%, at what level the solution is within the 55 gallon container
and when it reads empty the system will not mist. The circuit
board with its patent pending LCD display is housed in a weatherproof
NEMA4 enclosure with a panel door lock to control access. The
control panel along with the pump and motor assembly are positioned
and affixed onto the lid of the drum although it may be wall mounted
if so desired.
Remote
Control: Unlike other firms, who feature it as an available
option, a remote control is a standard feature on your MOSQUITO-PROTM
system. This remote allows you to mist in between scheduled spray
times or even turn the system off from inside the house up to
3,000 feet away from the system.
Pump & Motor Assembly
Acting as the heart
of the MOSQUITO-PROTM
system is the pump and motor assembly which is mounted on the
top of the reservoir along with the circuit board which controls
it. Pre-set orders are issued from the circuit board to the assembly
instructing it what day and time of day to spray as well as the
duration of each mist cycle. Thereby, acting in the manner of
a heart, it will pump Pyrethrum throughout the network of nylon
tubing to all of the nozzles within the spray zone. The standard
pump and motor assembly includes a ½ horsepower motor which
is more than sufficient to run the 140 gallon per hour pump. When
engaged, the pump easily maintains a steady pressure of between
160 and 200 psi to effectively distribute the Pyrethrum throughout
the spray zone.
Nozzle Network
The MOSQUITO-PROTM
system utilizes a nozzle network which acts much in the manner
of the human intravenous system. It
is essentially a network of nylon tubing that encircles the spray
zone where it delivers Pyrethrum to the nozzles which are specially
designed, aesthetically pleasing and quite inconspicuous. Each
of the nozzles is installed approximately 8 to 15 feet apart and
is positioned where
they will simultaneously spray a fine mist of Pyrethrum several
feet into the area in which they are directed. The nozzles themselves
are usually made of nickel plated brass with either stainless
steel or brass misting tips. Depending upon the overall design
of the perimeter spray zone, the nozzles will be affixed in the
most effective combination to the fencing, trees and eaves of
the house or as risers within the landscaping. The tubing itself
is fastened in such a manner as to not be readily seen and it
is available in black, white or natural which may be painted to
match the décor of the home. Where necessary, it is buried
in the ground within a protective conduit so that it is not easily
seen or damaged.
Pyrethrum
As the sole purpose of the MOSQUITO-PROTM
insect misting system is the controlled delivery of Pyrethrum
to an overall area, we may consider that substance to be much
like the blood of the human body. Please
click where indicated to learn more about Pyrethrum.
In Addition
. . .
Weather Sensors – You may also add a
rain sensor or a rain, wind & freeze sensor which will temporarily
deactivate the system at such times when the outside weather conditions
would make it ineffective.
When our MOSQUITO-PROTM
representative visits your home for the purpose of preparing
a price quote, a design and system layout customized for your
yard will be prepared. Our installation team of highly trained
and experienced technicians will use this plan when they come
to your home and they will know
just where to install the specially designed nozzles. They will
be placed strategically in accordance with the overall plan in
the best combination and location to control mosquitoes within
the spray zone. This may be on the eaves of the house, around
the fence line, on trees, or in the landscaping itself. The reservoir
with the circuit board controller and motor and pump assembly
will be located in an area of your yard, usually next to the air-conditioning
unit or pool equipment, where it will be inconspicuous and will
blend into the landscape. The MOSQUITO-PROTM
system can surely fit your needs and will be customized to your
outdoor environment.
We know that you are purchasing a MOSQUITO-PROTM
system in order to enjoy your outdoor home environment without
having to worry about mosquitoes and other insects. This is its
purpose and reason for being. Once it has been installed and programmed,
the system is worry-free and requires very little attention on
your part other than to refill the Pyrethrum. When this becomes
necessary, as indicated on the LCD readout of the system circuit
board, you need only call your MOSQUITO-PROTM
dealer and within approximately 24 hours, a technician will bring
your refill and make a routine inspection of the nozzle network
to make sure there are no leaks and it is misting properly. For
those who wish to handle the refills themselves, the Pyrethrum
is available on a do-it-yourself basis. Please remember that your
MOSQUITO-PROTM
dealer is your service and maintenance provider and is just a
telephone call away with no contract required.